Replacement for Hy-Pro HP285RNL12-10MB Hydraulic Filter Element
$72.40
LIVE UPS and LTL rates calculated on cart and checkout page!
Guaranteed direct replacement in form, fit, and function. Made in the USA with ISO Certified manufacturing for assured quality. Dual-layer, optimized microglass media is used for fine filtration, long life,and high dirt-holding capacity. Our filters are backed by ISO 16889 multi-pass testing and other ISO/SAE test protocols, common test methods .
- Bx = 1000, equivalent to avg efficiency of 99.9%, click here
- Hydraulic Fluid and Machining Fluids, Water Glycols and Coolants
- Diesel, Gasoline and other fuels, Lubricating Oils, Synthetic Lubricants, and Process Fluids
- Turbine and Compressor Lube Oils … And many more fluids
Part numbers indicated as replacements are not manufactured or affiliated with the OEM or Brand listed. Part numbers and names are used for cross reference only. Element may vary from the image displayed on the left.
O.D. | 2.508" |
---|---|
I.D. Top | 1.22" |
I.D. Bottom | NA |
Length Overall | 11.88" |
Construction Type | Microglass, Single Open End |
Efficiency | Beta 12.4 = 1000 |
Gasket Material | Viton |
Wire Mesh Support? | Yes |
Change-Out PSID | 25 PSID |
Max Operating Pressure | 145 PSID Collapse |
Max Temp | 250 Degrees |
Weight Each | 2 |
Condition | New |
Our Hy-Pro HP285RNL1210MB replacement hydraulic filter is a guaranteed direct replacement in form, fit, and function.
Our filter media is backed by ISO 16889 multi-pass testing and other ISO/SAE test protocols, and the filter is produced in an ISO Certified manufacturing facility. An ISO Certified manufacturing facility is all about quality control, consistency, responsibility, and being true to the design. If you’re not ISO 9001 Certified, your approach to quality and consistency is all talk.
This Hy-Pro HP285RNL1210MB hydraulic filter replacement element is beta-rated.
Optimized microglass media is used for fine filtration, just like the Hy-Pro HP285RNL1210MBhydraulic filter that you’re replacing. Our Microglass uses the optimal amount of media and pleats in the element to ensure high dirt-holding capacity. The correct number and design of pleats in the element will give you the lowest initial pressure drop, meaning the filter will take longer to reach its change-out pressure drop, usually 25 PSID.
- Beta 12.4 = 1000, equivalent to efficiency of 99.9%,
This filter is compatible with the following fluids, but pressure drop will vary depending on viscosity and temperature:
- Hydraulic Fluid and Machining Fluids, Water Glycols and Coolants
- Diesel, Gasoline and other fuels, Lubricating Oils, Synthetic Lubricants, and Process Fluids
- Turbine and Compressor Lube Oils … And many more fluids
Our Hy-Pro HP285RNL1210MB hydraulic filter is indicated as a replacement and is not manufactured by or affiliated with the OEM or Brand listed. Part numbers and names are used for cross reference only. The element may vary from the image displayed on the left.