Replacement for Parker FFKPVL1500910ABS Hydraulic Filter Element
$46.85
LIVE UPS and LTL rates calculated on cart and checkout page!
This SONA Filtration hydraulic filter element is a direct replacement for the Parker FFKPVL1500910ABS hydraulic filter element in form, fit, and function. The optimized filter media provides fine filtration, long life, and high dirt-holding capacity.
- Made in America for assured performance
- Quality ISO 9001:2015 certified manufacturing
- High-performance filter media tested to ISO 16889 protocols
| O.D. | 2.90" |
|---|---|
| I.D. Top | 1.26" |
| I.D. Bottom | NA |
| Length Overall | 3.89" |
| Construction Type | Optimized Microglass, Single Open-End |
| Efficiency | 10 Micron; B9.9 = 200, B12.4 = 1000 per ISO 16889 |
| Gasket Material | Viton |
| Wire Support | Yes |
| Max Operating Pressure | 363 PSID Collapse Pressure |
| Max Temp | 248 Degrees F |
| Weight Each | 1 |
| Carton Qty | 1 |
| Condition | New |
SONA Parker FFKPVL1500910ABS Replacement Filter
Our Parker FFKPVL1500910ABS replacement hydraulic filter is a guaranteed direct replacement in form, fit, and function. This means the filter will fit and you should expect performance to be equal to or greater than the OEM filter. Made in America.
Filtration Media for the Parker FFKPVL1500910ABS direct interchange
Our filter media is backed by ISO 16889 multi-pass testing and other ISO/SAE test protocols and the filter is produced in an ISO Certified manufacturing facility. An ISO Certified manufacturing facility is all about quality control, consistency, responsibility, and being true to the design. Optimized microglass media is used for fine filtration, just like the Parker FFKPVL1500910ABS hydraulic filter to be replaced. Our microglass filters use the optimal amount of media and pleats to ensure high dirt-holding capacity. The correct number and design of pleats in the element will give you the lowest initial pressure drop. Therefore the filter will take longer to reach its change-out pressure drop which is usually 25 PSID.
Micron Rating for the Parker FFKPVL1500910ABS cross
This Parker FFKPVL1500910ABS hydraulic filter replacement element is beta-rated. The filter performance is outstanding.
Filter Collapse Pressure for the Parker FFKPVL1500910ABS cross reference
A filter collapse pressure of 363 PSID Collapse Pressure means that if the filter is completely clogged and the build up of pressure reaches or surpasses 1 the filter may collapse and allow contamination downstream. Please use a satisfactory safety factor for the filter.
Compatible Fluids
This filter is compatible with the following fluids but pressure drop will vary depending on viscosity and temperature:
- Hydraulic Fluid and Machining Fluids
- Diesel and other fuels
- Lubricating Oils and Synthetic Lubricants
- Turbine and Compressor Lube Oils … And many more fluids
Visit the links below for more helpful information.
Our hydraulic filter is indicated as a replacement for Parker FFKPVL1500910ABS and is not manufactured by or affiliated with the OEM or Brand listed. Part numbers and names are used for cross reference only. The element may vary from the image displayed on the left.
