SONA Filtration Reviews:
SONA 5″ x 11″ Spin-On Filter – 3 Micron with Water Absorb
$56.13
Guaranteed direct replacement for SONA S3-0058077 hydraulic spin-on filter in form, fit, and function. Made in America with ISO 9001:2015 Certified manufacturing for assured quality. Optimized filter media inside the spin-on filter is used for fine filtration, long life, and high dirt-holding capacity.
- 5 OD x 11 Length x 1-1/2-16 UN Thread
- B3 = 200, B4.5 = 1000 per ISO 16889
- Buna gasket and a maximum temperature of No
- Yes
- Replaces hydraulic spin-on filter in form, fit, and function. Scroll down for additional specs
Part numbers and names are used for cross reference only. Part numbers indicated as replacements are not manufactured or affiliated with the OEM or Brand listed.
There is a minimum quantity of two per order.
Part numbers and names are used for cross reference only. Part numbers indicated as replacements are not manufactured or affiliated with the OEM or Brand listed.
| O.D. | 5 |
|---|---|
| I.D. Top | 1-1/2-16 UN |
| I.D. Bottom | NA |
| Length Overall | 11 |
| Construction Type | Microglass, Water Absorb Function |
| Efficiency | B3 = 200, B4.5 = 1000 |
| Gasket Material | Buna |
| Gasket Type | Flat |
| End Cap Material | Tin Plate Steel |
| Core | Tin-Plate Louvered |
| Wire Mesh Support? | Yes |
| Bypass Valve? | No |
| Jacket? | No |
| Handle? | No |
| Change-Out PSID | 25 PSID |
| Max Operating Pressure | 288 Burst |
| Max Temp | 248 Degrees |
| Weight Each | 4 |
This SONA Spin-On also has a water absorbency feature to absorb free and emulsified water from fluids passing through the filter.
Our filter media is backed by ISO 16889 multi-pass testing and other ISO/SAE test protocols, (common test methods) and the spin-on filter is produced in an ISO Certified manufacturing facility.
This spin-on filter is beta-rated. Not sure what that really means? Is it important? Click here to find out.
Optimized microglass media is used for fine filtration. Our Microglass uses the optimal amount of media and pleats in the element to ensure high dirt-holding capacity. The correct number and design of pleats in the element will give you the lowest initial pressure drop, meaning the filter will take longer to reach its change-out pressure drop, usually 25 PSID.
- B3.0 = 200, equivalent to efficiency of 99.5%, click here
This spin-on filter is compatible with the following fluids, but pressure drop will vary depending on viscosity and temperature:
- Hydraulic Fluid and Machining Fluids, Water Glycols and Coolants
- Diesel, Gasoline and other fuels, Lubricating Oils, Synthetic Lubricants, and Process Fluids
- Turbine and Compressor Lube Oils … And many more fluids
The spin-on may vary from the image displayed on the left. Please refer to our Terms and Conditions of Sale for answers to any question you may have.
