Replacement for Eppensteiner 167500SH20SLS000P Spin-On Filter

O.D.	5.06"
I.D. Top	1-1/2" UNF
I.D. Bottom	NA
Length Overall	10.94"
Construction Type	40 GPM, Microglass
Efficiency	20 Micron; B20 = 200, B26.6 = 1000
Gasket Material	Buna
Wire Support	Yes
Max Operating Pressure	145 Collapse, 261 Burst
Max Temp	248 Degress F
Weight Each	4.2
Carton Qty	1
Condition	New

SONA Eppensteiner 167500SH20SLS000P Replacement Spin-On Filter

Our Eppensteiner 167500SH20SLS000P replacement spin-on filter is a guaranteed direct replacement in form, fit, and function. This means the filter will fit and you should expect performance to be equal to or greater than the OEM filter. Made in America.

Filtration Media for the Eppensteiner 167500SH20SLS000P direct interchange

Our filter media is backed by ISO 16889 multi-pass testing and other ISO/SAE test protocols and the filter is produced in an ISO Certified manufacturing facility. An ISO Certified manufacturing facility is all about quality control, consistency, responsibility, and being true to the design. Optimized media is used for fine filtration, just like the Eppensteiner 167500SH20SLS000P spin-on hydraulic filter to be replaced. Our spin-on filters use the optimal amount of media and pleats to ensure high dirt-holding capacity. The correct number and design of pleats in the element will give you the lowest initial pressure drop. Therefore the filter will take longer to reach its change-out pressure drop which is usually 25 PSID.

Micron Rating for the Eppensteiner 167500SH20SLS000P cross

This Eppensteiner 167500SH20SLS000P spin-on filter replacement element is beta-rated. The filter performance is outstanding. The Beta X = 1000 number means that for every 1000 particles of x size in the fluid only one particle will pass through the filter on average.

• 20 Micron; B20 = 200, B26.6 = 1000

Filter Burst Pressure for the Eppensteiner 167500SH20SLS000P cross reference

A filter burst pressure of 261 Burst, 145 Collapse means that if the filter is completely clogged and the build up of pressure reaches or surpasses 261 Burst, 145 Collapse the filter may burst at the gasket or allow contamination downstream. Please use a satisfactory safety factor for the filter.

Compatible Fluids

This filter is compatible with the following fluids but pressure drop will vary depending on viscosity and temperature:

• Hydraulic Fluid and Machining Fluids
• Diesel and other fuels
• Lubricating Oils and Synthetic Lubricants
• Turbine and Compressor Lube Oils … And many more fluids

Visit the links below for more helpful information.

Our hydraulic filter is indicated as a replacement for Eppensteiner 167500SH20SLS000P and is not manufactured by or affiliated with the OEM or Brand listed. Part numbers and names are used for cross reference only. The element may vary from the image displayed on the left.