Replacement for Cim-tek 70134 Spin-On Filter

$18.88

4.8
Rated 4.8 out of 5

There is a minimum quantity of two per order.

Buy 12+, get Free Shipping to the 48 contiguous U.S. states.

Direct replacement for Cim-tek 70134 spin-on filter in form, fit, and function. Made in America with ISO 9001:2015 Certified manufacturing for assured quality.

  • 3.75″ OD x 1″ UNF ID Top x 5.38″ Length overall
  • 10 Micron per ISO 16889
  • 304 PSI Burst; 145 PSID Collapse
  • Replaces Cim-tek 70134 spin-on filter in form, fit, and function. Scroll down for additional specs
Accepted payment types
Source One N.A., LLC BBB Business Review
O.D.

3.75"

I.D. Top

1" UNF

I.D. Bottom

NA

Length Overall

5.38"

Construction Type

22 GPM Flow, Cellulose

Efficiency

10 micron

Gasket Material

Buna

Wire Support

No

Max Operating Pressure

304 PSI Burst; 145 PSID Collapse

Max Temp

248 Degress F

Weight Each

3

Carton Qty

12

Condition

New

SKU: SP453-57995 Category: Tags: , ,

SONA Cim-tek 70134 Replacement Spin-On Filter

Our Cim-tek 70134 replacement spin-on filter is a direct replacement in form, fit, and function.
This means the filter will fit and you should expect performance to be equal to or greater than the OEM filter.
Made in America.

Filtration Media used in the Cim-tek 70134 Cross

Our filter media is backed by ISO 16889 multi-pass testing and other ISO/SAE test protocols and the filter is produced in an ISO Certified manufacturing facility.
An ISO Certified manufacturing facility is all about quality control, consistency, responsibility, and being true to the design. Optimized microglass media is used for fine filtration, just like the Cim-tek 70134 spin-on filter to be replaced. Our microglass filters use the optimal amount of media and pleats to ensure high dirt-holding capacity.
The correct number and design of pleats in the element will give you the lowest initial pressure drop. Therefore the filter will take longer to reach its change-out pressure drop which is usually 25 PSID.

Micron Rating for the Cim-tek 70134 direct interchange

This Cim-tek 70134 spin-on filter replacement element is beta-rated. The filter performance is outstanding.
The Beta X = 1000 number means that for every 1000 particles of x size in the fluid only one particle will pass through the filter on average.

  • 10 Micron equivalent to efficiency of 99.9%

Filter Collapse Pressure for the Cim-tek 70134 spin-on replacement

A filter collapse pressure of 304 PSI Burst; 145 PSID Collapse means that if the filter is completely clogged and the build up of pressure reaches or surpasses 304 PSI Burst; 145 PSID Collapse the filter may collapse and allow contamination downstream. Please use a satisfactory safety factor for the filter.

Compatible Fluids

This filter is compatible with the following fluids but pressure drop will vary depending on viscosity and temperature:

  • spin-on Fluid and Machining Fluids
  • Diesel and other fuels
  • Lubricating Oils and Synthetic Lubricants
  • Turbine and Compressor Lube Oils … And many more fluids

Visit the links below for more helpful information.

Our spin-on filter is indicated as a replacement for Cim-tek 70134 and is not manufactured by or affiliated with the OEM or Brand listed. Part numbers and names are used for cross reference only. The element may vary from the image displayed on the left.

Contact SONA Filtration

Contact

Helpful Links

Pall Crosses Hydac Crosses Donaldson Crosses

Terms and Conditions

Common Filter Test Methods and Terminology

Beta Ratios and Filter Efficiency Explained

How big is a micron? Click here.

Frequently Asked Questions

Contact SONA

Manufacturing tolerances and specifications often vary between manufacturers. You, as the user and/or purchaser, are solely responsible for reviewing the specifications listed above, making the final selection of the product, and assuring that all performance, maintenance, safety, and warning requirements of your application are met. Our filtration products are not suitable for Aviation applications, nor are they compatible with Skydrol® fluid.

Registered Trademarks of indicated manufacturers are the property of those manufacturers and it is not our intent to imply that Source One N.A. is authorized or licensed to manufacture products under such manufacturer’s name or trademark. Names and part numbers used here are solely for reference.

Any Free Shipping program offered applies only to the contiguous 48 states of the U.S.A. and ships via UPS Ground or the most economical means.