Replacement for Cim-tek 70010 Spin-On Filter
Direct replacement for Cim-tek 70010 spin-on filter in form, fit, and function. Made in America with ISO 9001:2015 Certified manufacturing for assured quality.
- 3.75″ OD x 1″ UNF ID Top x 5.38″ Length overall
- 10 Micron per ISO 16889
- 304 PSI Burst; 145 PSID Collapse
- Replaces Cim-tek 70010 spin-on filter in form, fit, and function. Scroll down for additional specs
There is a minimum quantity of twelve per order.
SONA Filtration reviews:
Part numbers and names are used for cross reference only. Part numbers indicated as replacements are not manufactured or affiliated with the OEM or Brand listed.
22 GPM Flow, Cellulose
|Max Operating Pressure||
304 PSI Burst; 145 PSID Collapse
248 Degress F
SONA Cim-tek 70010 Replacement Spin-On Filter
Our Cim-tek 70010 replacement spin-on filter is a direct replacement in form, fit, and function.
This means the filter will fit and you should expect performance to be equal to or greater than the OEM filter.
Made in America.
Filtration Media used in the Cim-tek 70010 Cross
Our filter media is backed by ISO 16889 multi-pass testing and other ISO/SAE test protocols and the filter is produced in an ISO Certified manufacturing facility.
An ISO Certified manufacturing facility is all about quality control, consistency, responsibility, and being true to the design. Optimized microglass media is used for fine filtration, just like the Cim-tek 70010 spin-on filter to be replaced. Our microglass filters use the optimal amount of media and pleats to ensure high dirt-holding capacity.
The correct number and design of pleats in the element will give you the lowest initial pressure drop. Therefore the filter will take longer to reach its change-out pressure drop which is usually 25 PSID.
Micron Rating for the Cim-tek 70010 direct interchange
This Cim-tek 70010 spin-on filter replacement element is beta-rated. The filter performance is outstanding.
The Beta X = 1000 number means that for every 1000 particles of x size in the fluid only one particle will pass through the filter on average.
- 10 Micron equivalent to efficiency of 99.9%
Filter Collapse Pressure for the Cim-tek 70010 spin-on replacement
A filter collapse pressure of 304 PSI Burst; 145 PSID Collapse means that if the filter is completely clogged and the build up of pressure reaches or surpasses 304 PSI Burst; 145 PSID Collapse the filter may collapse and allow contamination downstream. Please use a satisfactory safety factor for the filter.
This filter is compatible with the following fluids but pressure drop will vary depending on viscosity and temperature:
- spin-on Fluid and Machining Fluids
- Diesel and other fuels
- Lubricating Oils and Synthetic Lubricants
- Turbine and Compressor Lube Oils … And many more fluids
Visit the links below for more helpful information.
Our spin-on filter is indicated as a replacement for Cim-tek 70010 and is not manufactured by or affiliated with the OEM or Brand listed. Part numbers and names are used for cross reference only. The element may vary from the image displayed on the left.
There are no reviews yet. Be the first one to write one.