Replacement for Filtermart 335879 Element for Housings andVessels
$52.40
There is a minimum quantity of six per order.
Direct replacement for Filtermart 335879 hydraulic filter in form, fit, and function. Made in America for assured quality. Optimized filter media is used for fine filtration, high dirt-holding capacity, and the ability to absorb free and emulsified water.
- 6.0″ OD x 2.62″ ID Top x 18.0″ Length overall
- 5 Micron with Water Absorbent per ISO 16889
- 100 PSID Collapse Pressure
- Replaces Filtermart 335879 hydraulic filter in form, fit, and function. Scroll down for additional specs
O.D. | 6.0" |
---|---|
I.D. Top | 2.62" |
I.D. Bottom | 2.62" |
Length Overall | 18.0" |
Construction Type | Cellulose with Water Absorbing function, Double Open End |
Efficiency | 5 Micron with Water Absorbent |
Gasket Material | Buna |
Wire Support | NA |
Max Operating Pressure | 100 PSID Collapse Pressure |
Max Temp | 248 Degress F |
Weight Each | 6 |
Carton Qty | 6 |
Condition | New |
Our Filtermart 335879 Replacement Filter
Our Filtermart 335879 replacement hydraulic filter is a guaranteed direct replacement in form, fit, and function. This means the filter will fit and you should expect performance to be equal to or greater than the OEM filter. Made in America.
Filtration Media for the Filtermart 335879 direct interchange
Our filter media is backed by ISO 16889 multi-pass testing and other ISO/SAE test protocols and the filter is produced in an ISO Compliant manufacturing facility. An ISO Compliant manufacturing facility is all about quality control, consistency, responsibility, and being true to the design. Optimized cellulose media is used for fine filtration, just like the Filtermart 335879 hydraulic filter to be replaced. Our cellulose filters use the optimal amount of media and pleats to ensure high dirt-holding capacity. The correct number and design of pleats in the element will give you the lowest initial pressure drop. Therefore the filter will take longer to reach its change-out pressure drop which is usually 25 PSID.
Micron Rating for the Filtermart 335879 cross
This Filtermart 335879 hydraulic filter replacement element is beta-rated. The filter performance is outstanding.
- 5 Micron with Water Absorbent
Filter Collapse Pressure for the Filtermart 335879 cross reference
A filter collapse pressure of 100 PSID Collapse Pressure means that if the filter is completely clogged and the build up of pressure reaches or surpasses 100 PSID Collapse Pressure the filter may collapse and allow contamination downstream. Please use a satisfactory safety factor for the filter.
Compatible Fluids
This filter is compatible with the following fluids but pressure drop will vary depending on viscosity and temperature:
- Hydraulic Fluid and Machining Fluids
- Diesel and other fuels
- Lubricating Oils and Synthetic Lubricants
- Turbine and Compressor Lube Oils … And many more fluids
Visit the links below for more helpful information.
Our hydraulic filter is indicated as a replacement for Filtermart 335879 and is not manufactured by or affiliated with the OEM or Brand listed. Part numbers and names are used for cross reference only. The element may vary from the image displayed on the left.