Replacement for Accutex CNC Model EDM Wire Machine Filters
$21.85 – $24.85
Direct replacement for Accutex CNC Filter Sytem filter elements in form, fit, and function. Made in America for assured quality. Optimized filter media is tested to ISO 16889 and used for fine filtration, long life, and high dirt-holding capacity. Scroll down for additional specs and information.
Micron level choice is a function of processes or material being cut:
- Carbide, Carbon, or Graphite use 0.35 to 1 micron
- Tool Steel use 3 to 5 micron
- Gold use 1 to 5 micron
- Stainless Steel, Brass, or Copper use 5 to 10 micron
- Aluminum use 10 to 20 micron
There is a minimum quantity of six per order.
Part numbers and names are used for cross reference only. Part numbers indicated as replacements are not manufactured or affiliated with the OEM or Brand listed.
| O.D. | 6.0" |
|---|---|
| I.D. Top | 2.625" |
| I.D. Bottom | 2.625" |
| Length Overall | 18.0" |
| Construction Type | Cellulose, Double Open End |
| Micron Rating | 5 Micron with handle and outer wrap, 10 Micron with handle, 10 Micron with handle and outer wrap, 5 Micron with outer wrap, 10 Micron with outer wrap, 20 Micron with handle and outer wrap, 20 Micron with outer wrap |
| Gasket Material | Buna |
| Wire Support | NA |
| Max Operating Pressure | NA |
| Max Temp | 248 Degress F |
| Weight Each | 4.5 |
| Carton Qty | 6 |
| Condition | New |
SONA Accutex CNC Replacement Filter Elements
Our Accutex CNC replacement EDM filter is a guaranteed direct replacement in form, fit, and function. This means the filter will fit and you should expect performance to be equal to or greater than the OEM filter. Made in America.
Filtration Media for the Accutex CNC direct interchange
Our filter media is backed by ISO 16889 multi-pass testing and other ISO/SAE test protocols. Optimized cellulose media is used for fine filtration, just like theAccutex CNC EDM filter to be replaced. Our cellulose filters use the optimal amount of media and pleats to ensure high dirt-holding capacity. The correct number and design of pleats in the element will give you the lowest initial pressure drop. Therefore the filter will take longer to reach its change-out pressure drop which is usually 25 PSID.
Visit the links below for more helpful information.
Our EDM filter is indicated as a replacement for Accutex CNC filter elements and is not manufactured by or affiliated with the OEM or Brand listed. Part numbers and names are used for cross reference only. The element may vary from the image displayed on the left.
Reviews
There are no reviews yet. Be the first one to write one.